thecatrave*

DJ gear

Best vintage turntables

The classic decks worth buying second-hand, from the Technics SL-1200MK2 to the Garrard 301, and what to check before you pay.

Buying a vintage turntable

A vintage turntable is a deck made decades ago and bought second-hand. The risk is condition: a decades-old deck may need a new belt, idler wheel, bearing oil or stylus before it plays properly.

Below are the vintage turntables worth looking for, what each one is, and what to check before you buy. Facts and the old used prices come from the hi-fi press, dated where they appear, because used prices move. Nothing was tested for this page; I DJ on controllers, not turntables. The photographs are of real surviving decks, from Wikimedia Commons under open licences.

Top vintage turntables compared

TurntableFromDriveBest forUsed price (date)
Technics SL-1200MK21979DirectBest vintage£300 and up (2018)
Linn Sondek LP121973BeltUpgradable belt drivenot given
Garrard 3011953IdlerClassic idler driveabout £1,000 with plinth, 301 or 401 (2018)
Garrard 401Later than the 301IdlerThe later Garrardabout £1,000 with plinth, 301 or 401 (2018)
Thorens TD 124Late 1950sBelt and idlerCollectorsabout £500 (2018)
Rega Planar 3Late 1970sBeltAffordableabout £100, £200 mint (2013)
Lenco GL751970IdlerVariable speedabout £120 (2018)

Technics SL-1200MK2: the best vintage turntable

The SL-1200MK2 came out in 1979 as an update to the 1972 SL-1200. Gearnews lists what changed: a longer ±8% pitch slider, quartz lock to hold speed, and a body reworked to absorb vibration. It was adopted by club DJs and radio stations, and Technics made the series until 2010, then brought it back in 2016. The SL-1200MK7 is the current version.

A silver Technics SL-1200MK2 turntable with its pitch slider and strobe dots
A Technics SL-1200MK2. Photograph: Adrian DuMay, CC BY 2.0.

The Vinyl Factory, writing in 2018, put used ones at £300 and up. DJs still keep them: Paul Rayner, who plays upfront and classic house, listed Technics 1210 Mark 2s among his studio gear to DJWORX in 2024.

Video: Channel 33 RPM, Technics SL1200 for serious home listening? TURNTABLE REVIEW.

Linn Sondek LP12: one of the great vintage turntables you can still upgrade

The LP12 was Linn's first product, launched in 1973. Stereonet's history describes a belt-driven deck with an AC motor, a sprung subchassis and a single-point bearing, revised again and again since. Linn still makes it, and What Hi-Fi reported in 2019 that Linn's factory will upgrade old LP12s to current specification, and that upgrades outsell new decks, so a 1970s LP12 is not a dead end.

A Linn Sondek LP12 turntable in a wooden plinth
A Linn Sondek LP12. Photograph: RayL11111111, CC BY-SA 3.0.
Video: Infinite Baffle, Linn LP12 Turntable Review at Audio Affair.

Garrard 301: the classic idler-drive deck

Garrard's 301 is an idler-drive deck from 1953: a wheel between the motor and the platter drives it, rather than a belt. The Vinyl Factory describes a powerful low end, and notes that the plinth, the base it sits in, changes how it sounds. It put a 301 or 401 with a plinth at about £1,000 in 2018.

A Garrard 301 turntable in a plinth, fitted with an SME tonearm
A Garrard 301 with an SME arm. Photograph: Jacques from Cape Town, South Africa, CC BY 2.0.

Copper, the PS Audio magazine, noted in 2021 that the 301's cast aluminium chassis can flex. Its writer's advice for a used one: replace a worn idler wheel and springs to cure wow, and have the motor's wiring checked, as he had to.

Video: Record Collectors Paradise, Playtesting a Garrard 301 Turntable with Quad II Amplifiers.

Garrard 401: the later Garrard

The 401 followed the 301. Copper notes that its chassis has bracing underneath. It shares the idler drive, the need for a good plinth, and the same checks before you buy.

A Garrard 401 turntable in a plinth, fitted with an SME tonearm
A Garrard 401 with an SME arm. Photograph: RayL11111111, CC BY-SA 3.0.
Video: VINTAGE AUDIO HUB, Garrard 401 Turntable Review – British Engineering at Its Finest! 🔥 | Vintage Audio Hub.

when mounted properly and fitted with a good arm it is up amongst the best

Thorens TD 124: the collector's Swiss deck

The TD 124 is a Swiss deck from the late 1950s. The Vinyl Factory describes its drive as a belt plus an idler wheel, and put used ones at about £500 in 2018.

A Thorens TD 124 turntable fitted with a Rabco tonearm
A Thorens TD 124 with a Rabco arm. Photograph: Everfalling, CC BY 2.0.

The one pictured has a Rabco tonearm, an aftermarket arm, so check which arm a used one comes with.

Rega Planar 3: a good vintage turntable for less

The Planar 3 was launched in the late 1970s. It is belt drive with a synchronous AC motor, and Rega still makes a Planar 3 today, alongside the Planar 3 RS Edition. Zstereo, in 2013, put used ones at about £100, or £200 for a mint example. The modern versions are in the best turntables guide.

Lenco GL75 and Pioneer PL-12D: two more to look for

The Goldring/Lenco GL75, from 1970, is an idler-drive deck with a speed control from 30 to 86 rpm; the Vinyl Factory put it at about £120 in 2018. The Pioneer PL-12D is a belt-drive deck from about 1973, made in Tokyo, and the Science Museum holds one in its collection.

What to check before you buy a vintage turntable

  • The belt or idler wheel. A belt should be present; if not, budget for one. On an idler deck, a worn wheel causes wow, and Copper's advice is to replace it.
  • The motor and bearing. The platter should run smoothly and quietly, with little play when you rock it. Ask when the bearing was last oiled.
  • The tonearm. It should feel solid and move freely. Check the cables for fraying.
  • The stylus. Assume it needs replacing unless the seller can prove it is new.
  • Speed. A strobe disc shows whether the deck holds speed.
  • Hum. Hum can be a grounding fault. Listen before you pay if you can.
  • The plinth. Damp storage can split MDF plinths.

Vintage turntable questions

Is it worth buying a vintage turntable?

Often, yes: Linn still upgrades old LP12s, and the Technics SL-1200MK2 was built for club use. Budget for a belt, a stylus and possibly a service, and buy from someone who lets you see or hear it working.

What should I look for in a used turntable?

A smooth, quiet motor and bearing, an arm that moves freely, a good belt or idler wheel, and a deck that holds speed. Assume the stylus needs replacing.

Are old Technics turntables good?

The SL-1200MK2 was built for clubs and radio, and DJs such as Paul Rayner still keep them in their studios. The Vinyl Factory put used ones at £300 and up in 2018; check one as you would any used deck.

Sources.