thecatrave*

Vinyl gear

Best speakers for a turntable

Seven pairs of speakers for a record player in 2026, from about $160 to $1,400, split by the one thing that decides what works: whether the phono preamp is in the speakers, the turntable or an amplifier.

What speakers a turntable needs.

A record player makes a very small signal. Before any speaker can play it, two things have to happen: a phono preamp has to raise that signal to line level and correct its tone, and an amplifier has to make it strong enough to move the speaker cones. Which speakers suit your turntable depends mostly on where those two jobs are done.

There are three ways to do it. Powered speakers with a phono input do both jobs inside the speakers, so any turntable plugs in. Powered speakers without a phono input have the amplifier but not the preamp, so they need a turntable with a preamp built in, or a separate phono stage between the two. Passive speakers do neither job and need a stereo amplifier, ideally one with a phono input. The mistake to avoid when buying speakers for a record player is getting a pair that cannot take the turntable you already own.

How the list was made: no listening test. Specs come from the makers' own pages and spec sheets, and every phono-input claim was checked against the maker's spec table, not a shop listing. Prices are the makers' own US prices unless marked as a shop price. I DJ on controllers, not turntables, so nothing here is presented as hands-on experience. The photographs are the makers' own.

The best speakers for a record player compared

"Phono input" is the column that matters most. "Yes" means a turntable with no preamp of its own can plug straight in. "No" means the turntable needs a built-in preamp, or a phono stage in between.

SpeakersBest forTypePhono inputPower (maker)WooferSub outPrice (US)
Kanto YU4Best overallPoweredYes, switchable70 W RMS (140 W peak)4 inYes$479.99
Klipsch R-51PMHorn tweeter, bigger wooferPoweredYes, switchable120 W total (240 W peak)5.25 inYes$499.99 (shop list price)
Klipsch The Fives IIVinyl and the TVPoweredYes, separate inputNot published5.25 inYes$1,399.99 (shop price)
Edifier R1280DBsLowest pricePoweredNo42 W RMS4 inYesabout $160 to $200 (shop prices)
Fluance Ai41Bigger woofer for the moneyPoweredNo90 W RMS5 inYes$299.99
Audioengine A5+ WirelessLarger roomsPoweredNo50 W RMS per channel5 inRCA output$499 to $569
Wharfedale Diamond 12.1iPassive, with an amplifierPassiveNeeds an amplifierAmplifier of 20 to 100 W5 inNo$499

Kanto YU4: the best speakers for a turntable overall

Buy the YU4 if you want one box to buy and nothing else to think about. It is a powered bookshelf pair with a phono preamp inside: the RCA input has a switch for phono or line, and there is a ground terminal for the thin earth wire most turntables have. Set the switch to phono for a deck with no preamp; set it to line if your record player already has one switched on.

A single matte white Kanto YU4 powered speaker seen from the front, with a black woofer and tweeter
The Kanto YU4, a powered pair with a phono preamp built in. Image: Kanto Audio.

Kanto rates the amplifier at 70 watts RMS (140 watts peak) across the pair. Each speaker has a 4-inch Kevlar woofer and a 1-inch silk dome tweeter. Besides the turntable input, there are two optical inputs for a TV, a 3.5mm aux input, Bluetooth 4.0 with aptX, and a subwoofer output if you later want more low bass.

Video: Old Guy Hifi, A quick look at the KantoYU4 Powered Speakers. They are very good..

the YU4 speakers perform very well indeed providing a complex soundstage and enough detail to engage and delight the ear.

The trade-off is size. Each speaker is 8.7 inches tall and 5.5 inches wide, which suits a desk, a shelf or a small room, but a 4-inch woofer will not fill a large living room the way the 5-inch and 5.25-inch pairs below can. Kanto's own site listed the YU4 at $479.99 a pair.

Klipsch R-51PM: horn-loaded, with a phono input

The R-51PM is the other powered pair here with a phono stage built in, and the one to choose if you want a bigger woofer and cabinet than the Kanto's. Klipsch's spec sheet confirms a phono/line switch on the analog input and a ground screw beside it.

A pair of black Klipsch R-51PM powered speakers with square horn tweeters and copper-coloured woofers
The Klipsch R-51PM, with a switchable phono input on the back. Image: Klipsch.

The tweeter sits in a square horn, Klipsch's Tractrix design. Below it is a 5.25-inch copper-coloured woofer. Klipsch rates the amplifier at 120 watts total (240 watts peak) and the frequency response at 68Hz to 21kHz. Inputs also include optical, USB, a 3.5mm aux and Bluetooth, and there is a subwoofer output.

Video: nloop, Klipsch R-51PM Review - The Best Speakers for Vinyl!.

They are larger than the Kanto: about 13 inches tall, 7 inches wide and 8.5 inches deep, so check your shelf. Klipsch does not print a price on its page; US shops list them at $499.99. That is a shop figure, not the maker's.

Klipsch The Fives II: for vinyl and the TV

The Fives II are for someone who wants one pair of speakers for records, the TV and streaming. They cost far more than anything else here, and most of that money goes on things a turntable never uses. Klipsch's spec sheet lists a dedicated RCA phono input with the preamp built in, separate from the line-level RCA input.

A pair of black Klipsch The Fives II powered speakers, grilles on, with a control panel on top of one speaker
Klipsch The Fives II, with a phono input and HDMI for the TV. Image: Klipsch.

The rest of the spec sheet is about the living room: HDMI with eARC and an HDMI 2.1 pass-through output, Wi-Fi with AirPlay 2, Google Cast, Spotify Connect, Tidal Connect and Qobuz Connect, Bluetooth 5.4, optical and USB-C audio. Each speaker has a 1-inch titanium tweeter in a Tractrix horn and a 5.25-inch woofer, with a frequency response of 50Hz to 25kHz. Klipsch publishes no wattage, only a maximum output of 103 dB. There is a subwoofer output.

Video: UnitedStatesofAnalog, Are The NEW Klipsch The Fives II REALLY Worth $1399?.

a meaningful leap forward that makes you wonder how you ever lived without them.

If you only play records, the R-51PM gets you the same kind of horn tweeter and woofer size with a phono input for about a third of the price. The Fives II make sense when they are also replacing a soundbar. US shops list them at $1,399.99 a pair.

Edifier R1280DBs: the cheapest good speakers for a record player

The R1280DBs are the cheapest pair here and a sensible first pair for a record player that has its own preamp. They have no phono input. Edifier's spec page lists two RCA line inputs, optical, coaxial and Bluetooth, and nothing for phono, so a deck without a preamp needs a separate phono stage.

The amplifier is rated at 21 watts per channel, 42 watts in all, driving a 4-inch woofer and a half-inch silk dome tweeter in each wooden cabinet. That is the lowest power here, fine for a desk or a bedroom and less so for a large room. Mind the "s" on the end: the plain R1280DB, sold alongside it, has no subwoofer output.

Edifier's own page gives no US price. US shops sell the R1280DBs for about $160 to $200.

Fluance Ai41: a bigger woofer for the money, no phono input

The Ai41 is a step up from the Edifier in power and woofer size for about $100 more. Fluance rates it at 90 watts, 45 watts RMS per channel, with a 5-inch woven glass fibre woofer and a 1-inch silk dome tweeter. Inputs are RCA, optical and Bluetooth 5.0, and there is a subwoofer output.

A pair of black Fluance Ai41 powered bookshelf speakers seen from the front
The Fluance Ai41. Fluance lists no phono preamp, so it needs a turntable with one. Image: Fluance.

Fluance's own spec table says "Phono Preamp: No". So it is not ready for every turntable. Pair it with a record player that has a built-in preamp, or add a phono stage.

Video: Paul Youdelis, Fluance Ai41 Powered Speakers - Unboxing, Set-up and Review.

Fluance sells the Ai41 for $299.99. The same page lists the larger Ai61 at $349.99 and the Ri71 at $499.99 if you want more of the same.

Audioengine A5+ Wireless: bigger sound for larger rooms

The A5+ Wireless suits a bigger room and a turntable that already has a preamp. Audioengine rates its Class AB amplifier at 50 watts RMS per channel (150 watts peak in all), driving a 5-inch aramid fibre woofer and a 0.75-inch silk dome tweeter in each speaker.

A pair of wood-finish Audioengine A5+ powered speakers with grey woofers
The Audioengine A5+ from the front; the Wireless version looks the same. Image: Audioengine.

Audioengine's page lists RCA and 3.5mm inputs, an RCA output and aptX HD Bluetooth, and does not list a phono input, so treat it as needing a turntable with a preamp or a separate phono stage. Against the Kanto at the same money, you trade the built-in phono stage for bigger woofers and more power.

Video: Digital Trends, Audioengine A5+ Wireless Speakers Review.

They're versatile, sound good with or without a subwoofer, and would look good in any living room or office.

Audioengine's own site listed the A5+ Wireless at $499 a pair in black or white and $569 in walnut.

Wharfedale Diamond 12.1i: passive speakers, with an amplifier

Passive speakers are the route for anyone who wants to choose the amplifier separately, or who already owns one. They have no power cable and no inputs except speaker terminals, so the record player plugs into an amplifier and the amplifier drives the speakers. If the amplifier has a phono input, any turntable works; if not, the turntable needs its own preamp.

The Diamond 12.1i is a standmount pair with a 5-inch woofer and a 1-inch textile dome tweeter. Wharfedale rates its sensitivity at 88 dB and recommends an amplifier of 20 to 100 watts, with a frequency response of 65Hz to 20kHz. Each speaker is 12.3 inches tall and 7.1 inches wide.

Wharfedale USA listed the pair at $499. Budget for an amplifier on top, which is the trade-off against a powered pair at the same price: more spent overall, but you can replace either half later.

What to look for in record player speakers

Check these, in this order:

  • A phono input, or not. Look at your turntable first. If it has a built-in preamp (often a switch marked "phono/line" on the back), any powered speakers with an RCA input will work. If it does not, buy speakers with a phono input, such as the Kanto YU4 or Klipsch R-51PM, or add a separate phono stage. Plugging a deck with no preamp into a line input gives a quiet, thin sound.
  • Powered or passive. Powered speakers have the amplifier built in and are the simpler buy. Passive speakers need a separate amplifier, which costs more but can be upgraded on its own.
  • Room size and woofer size. A 4-inch woofer suits a desk or a small room. A 5-inch or 5.25-inch woofer and more power suit a living room.
  • A subwoofer output. Every powered pair here has one, or an RCA output that can feed one. It lets you add low bass later without replacing the speakers.
  • Other sources. If the same speakers will run a TV, look for optical or HDMI. If they will play from a phone, Bluetooth. None of that changes how a record sounds.

Turntable speakers FAQ

What are the best speakers for a vinyl player?

The best vinyl player speakers for most people are the Kanto YU4 ($479.99), because the phono stage is built in and any turntable plugs straight in. The Klipsch R-51PM is the alternative with a phono input and a bigger cabinet. If your vinyl player has its own preamp, the Fluance Ai41 ($299.99) is good value.

Do I need a preamp to connect a turntable to speakers?

You need one somewhere. It can be inside the turntable, inside the speakers (the Kanto YU4, Klipsch R-51PM and Klipsch The Fives II have one), inside an amplifier, or a separate box. You only need to buy one if none of your equipment has it.

What are good speakers for a turntable under $300?

The Edifier R1280DBs (about $160 to $200) and the Fluance Ai41 ($299.99). Neither has a phono input, so both need a turntable with a built-in preamp or a separate phono stage.

Do I need a record player amp and speakers, or just speakers?

With powered speakers, just the speakers: the amplifier is inside. With passive speakers such as the Wharfedale Diamond 12.1i, you need a record player amplifier and speakers, and the amplifier should have a phono input unless the turntable has its own preamp.

Can I use wireless speakers with a record player?

Yes, if the speakers also have a wired input. All the powered pairs here have Bluetooth or Wi-Fi as well as an RCA input; the turntable connects by cable and the wireless connection is for your phone. A turntable that sends its own Bluetooth signal is a different setup, and the record is then heard through the Bluetooth link.

Are bigger speakers better for vinyl?

Not on their own. Bigger woofers and more power suit a bigger room; on a desk or in a small room, a 4-inch pair such as the Kanto YU4 or Edifier R1280DBs is enough. Match the woofer size and power to the room, then check the phono input.

Sources.